Test Again

Now, I'm gonna test the pedal again before doing anything else.


This is similar to the previous setup, but now the circuit is on the veroboard instead of the breadboard. The jack sleeves connect to ground and the tips connect to wires leading to the input and output rows of the veroboard.


Here's a picture from the last post. To match the schematic, the input is a green wire and output is a blue wire. So the green wire connects to the tip of the input jack and the blue wire connects to the tip of the output jack. The black wire connects to the ground of the breadboard and the red wire connects to the positive 9V rail of the blackboard. The white wire here goes to pin 3 of the pot.