Testing!!

Here is my plan for testing:

Connect the battery to the positive 9v and ground on the board, the input and output on the board to the jacks, and connect the ring of the jacks to ground.

I accomplished this using a breadboard. Also, I added the pots and toggle switch to the circuit, but forgot to take pictures. I just soldered them in place according to the schematic.

Testing the circuit at home, hooked up to my guitar and amp.

My theory for why the board isn't working is that I burned out the transistors. Also, I might be using an incorrect method to test it out? I'm not sure, this will require some more research.